X-BIKE is carbon rims manufacturer and wheel sets builder. We specialize in this field for 10 years, with the strength of special superlight carbon road wheel, 5&3 spokes. It is solid and PMI ROHACELL foam (www.rohacell.com) from Germany.Structure is same as brand, Mavic, Corima.
The weight is ab 360g for 1 pc clincher 30mm rim with 23mm width. Ab 410g for 1 pc clincher 46mm carbon rim. Contact us for more detail information via info@xbikewheels.com
Why X-BIKE superlight carbon rims?
1. Light-weight solid structure with PMI foam.
Solid rims are different,the core of the rims is structured with stiff foam. It can effectively deter the distortion of the rim, let the padding power directly on the tire. Of cource, the spokes must be properly tensioned.
The weight is only about three quarters of the normal rims. With the good inertia effect, they also keep the outstanding acceleration feature of the light-weight and low-depth.
2. Excellent heat resistance property
The civil use HIGH TG resin is used in general carbon rims, the heat resistance is OK, but it is too fragile, the rims will crack easily hit in the condition of high temperature. However the high temperature resistance resin used in HP series rims is specially applied in aero facilities, which was produced as per the military standards. In combining with high modulus carbon fiber, it can comprehensively enhance the strength of rims.
3. High rigidity carbon fiber
We are using T700,T1000 and M40JB carbon fiber made by Japanese TORAY. M40JB is high rigidity carbon fiber, with a modulus of 40T, which is 67% higher than the ordinary T700; It builds a substantial foundation for the rims' quality.